7. Assembly, Disassembly
KISS 4U KTC5520 – User's Guide (Version 1.01)
7.4.
Accessing Internal Components
This section contains important information that you must read before accessing the internal components. You must
follow these procedures properly when handling any boards or replacing the fan slide-in module.
7.4.1.
Installing/Removing the Expansion Cards
Please consider following instruction when you install (or remove) expansion cards.
When you install (or remove) expansion cards please consider the corresponding safety instruction of
the included “General Safety Instruction for IT Equipment”.
Activities such as working inside the system or handling the expansion cards have to be carried-out by
the service person for this area or a suitably instructed user.
Please follow the safety instructions for components that are sensitive to electrostatic discharge (ESD).
Failure to observe this warning notice can result in damage to the device.
Please consult the documentation provided by the manufacturer of the expansion card for instructions
before attempting to install/remove an expansion card into/from your system.
www.kontron.com
25