6. Product Description
KISS 4U KTC5520 – User's Guide (Version 1.01)
6.3.
Rear Side
Depending on the KISS 4U KTC5520 platform configuration ordered, the rear panel will have the external interfaces of the
integrated server board, any additional interfaces, the power supply unit and the air exhaust openings.
1
8
2
7
3
4
9
10
5
11
6
Fig. 18: Rear side of the KISS 4U KTC5520 platform
1
AC power supply unit (PSU)
2
Power supply fan
3
AC input connector
4
“On/Off” switch of the power supply unit
5
Interfaces of the server board (depending on the
system configuration)
6
Free expansion card slots (depending on the
system configuration ordered)
7
Air exhaust openings
8
Rear side of the cover with captive knurled screws
9
Grounding stud (without PE sign)
[the ground stud is marked with PE (Protective Earth) symbol
if the KISS 4U KTC 5520 platform is equipped with a redundant
power supply]
10
Externally accessible screw (countersunk screw M3x6) for the
fastening of the card retaining bracket
11
Cut-outs for optional (customer-specific) interfaces routed to
the rear panel (9-pin D-SUB type)
6.3.1.
Interfaces on the Rear Side
The positioning and number of the KISS 4U KTC5520 platform interfaces on the rear side may vary
depending on the system configuration.
Information and technical data can be found in the manual of the installed KTC5520/EATX Server-Board.
You can download the board manual for your system from our web site at
by selecting
the product name.
20
www.kontron.com