5. System Overview
KBox A-201/A-202 – User’s Guide (Version 1.2)
26
www.kontron.com
5.9.
Rear Side View
5.9.1.
Rear Side View of the KBox A-201/A-202 with Vertical Mounting Bracket
The KBox A-201/A-202 is designed for wall mounting, in vertical position inside of a control cabinet.
Please observe the mounting instructions included in the section 7 “Installation Instructions”, and the outline dimensions
in the subsection 10.1.2 “Mechanical Specifications of the KBox A-201/A-202 with Vertical Mounting Plate”.
Fig. 12: Rear side of the KBox A-201/A-202 system with vertical mounting plate
The vertical mounting plate is factory-installed (when KBox A-201/A-202 was ordered with vertical
mounting plate).
If the vertical mounting plate was ordered later and is to be mounted subsequently, first remove the
rear panel of the KBox A-201/A-202.
Do not mount the vertical mounting plate on top of the rear panel!
2
2
1
Vertical mounting plate
2
Key holes on the mounting plate
3
Screws that secure the mounting plate to the chassis of
the KBox A-201/A-202
1
3
3
