EZ2-VX6060
Equipment Presentation
Page 10
SD.DT.F65-0e
Powering the system Off and On
DO NOT turn the power on while the power is cycling off. Wait a few seconds until the power has
completely cycled off. Follow the same precaution for turning the power off.
Turning the power on or off before this cycle is complete can cause the voltage and temperature
values programmed into the board monitoring system to be lost.
MAKE SURE YOU FOLLOW THESE SAFETY PRECAUTIONS.
Make sure the rack has been powered off using the ON/OFF button (on the rear panel of the rack)
before unplugging the power supply cable.
1.8.2
Play
>
Plug the system as described in section 1.8.1 “Plug” page 8.
>
Power on the system
>
Following screens appear for a few seconds, then VX6060 continues with the Linux boot.:
4
BIOS
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.
Press <DEL> or <F2> to enter setup. Press <F7> for BBS POPUP Menu.
VX6060-A>
4
Linux Fedora 12
