
Introduction
CP690HS
Page 1 - 4
ID 20955, Rev. 05
P R E L I M I N A R Y
1.2
Optional Modules
1.2.1
CP-RIO6-90 Dual PIM Rear I/O Transition Module
The CP-RIO6-90 rear I/O transition module has been designed for use only with the CP690HS
6U CompactPCI board from Kontron and
enables the user to connect up to two PIM modules
to the CP690HS.
For further information on this rear I/O transition module, refer to Appendix A, “CP-RIO6-90”.
1.3
System Relevant Information
The following system relevant information is general in nature but should still be considered
when developing applications using the CP690HS.
Table 1-1:
System Relevant Information
SUBJECT
INFORMATION
Master/Slave Functionality
The CP690HS can operate only as a slave board.
Board Location in the System
The CP690HS board must be installed in a peripheral slot of a CompactPCI back-
plane.
Hot Swap Compatibility
The CP690HS is hot swap capable in compliance with the PICMG 2.1 R1.0 Hot
Swap specification.
Hardware Requirements
The CP690HS can be installed in any CompactPCI 6U rack.
Summary of Contents for CP690HS
