CP605
Phoenix BIOS
ID 25095, Rev. 07
© 2004 Kontron Modular Computers GmbH
Page 5 - 5
2509
5.07.UG.VC.041005/14230
4
Use the left and right (->, <-) arrow keys to make a selection.
See the section below, "Exiting Setup," for a description on exiting the Main Menu.
5.1.4
The Legend Bar
Use the keys listed in the legend bar on the bottom to make your selections or exit the current
menu. The chart on the following page describes the legend keys and their alternates.
To select an item
, use the arrow keys to move the cursor to the field you want. Then use the
plus-and-minus value keys to select a value for that field. The Save Values commands in the
Exit Menu save the values currently displayed in all the menus.
To display a sub menu
, use the arrow keys to move the cursor to the sub menu you want.
Then press
<Enter>
.
A pointer
marks all sub menus.
5.1.5
The Field Help Window
The help window on the right side of each menu displays the help text for the currently selected
field. It updates as you move the cursor to each field.
Table 5-2: The Legend Bar
KEY
FUNCTION
<F1> or <Alt-H>
General Help window (See below).
<Esc>
Exit this menu.
arrow keys
Select a different menu.
arrow keys
Move cursor up and down.
<Tab> or <Shift-Tab>
Cycle cursor in the Time and Date field.
<Home> or <End>
Move cursor to top or bottom of window.
<PgUp> or <PgDn>
Move cursor to top or bottom of window.
<F6> or <+> or <Space>
Select the Next Value for the field.
<F9>
Load the Default Configuration values for the complete BIOS.
<F10>
Save and exit.
<Enter>
Execute Command or Select
P
Submenu.
<Alt-R>
Refresh screen.
