CP6004-SA/-RA/-RC/CP6004X-SA
Starting uEFI BIOS Setup
ID 1053-6161, Rev. 3.0
Page 5
D R A F T — F O R I N T E R N A L U S E O N L Y
1.2
Navigation
The uEFI BIOS setup program uses a hot key-based navigation system. A hot key legend is
located in the right frame on most setup screens.The following table provides information con-
cerning the usage of these hot keys.
HOT KEY
DESCRIPTION
<F1>
The <F1> key is used to invoke the General Help window.
<F2>
The <F2> key is used to restore the previous values.
<F3>
The <F3> key is used to load the defaults.
<F4>
The <F4> key is used to save the current settings and exit the uEFI BIOS Setup.
Right/Left
The Right and Left <Arrow> keys are used to select a major Setup screen.
For example: Main Screen, Advanced Screen, Chipset Screen, etc.
Up/Down
The Up and Down <Arrow> keys are used to select a Setup function or a sub-screen.
+ -
Plus/Minus
The Plus and Minus <Arrow> keys are used to change the field value of a particular Setup
function, for example, system date and time.
<ESC>
The <ESC> key is used to exit a menu or the uEFI BIOS Setup.
Pressing the <ESC> key in a sub-menu causes the next higher menu level to be displayed.
When the <ESC> key is pressed in a major Setup menu, the uEFI BIOS Setup is terminated
without saving any changes made.
<Enter>
The <Enter> key is used to execute a command or select a menu.