Functional Description
CP6003-SA
Page 2 - 4
ID 1044-9757, Rev. 2.0
P R E L I M I N A R Y
2.2
Memory
The CP6003-SA supports a dual-channel (144-bit) DDR3 memory with Error Checking and
Correction (ECC) running at 1333 MHz (memory error detection and reporting of 1-bit and 2-bit
errors and correction of 1-bit failures). It provides two 204-pin sockets for two DDR3 ECC SO-
DIMM modules that support system memory configurations of 4 GB, 8 GB or 16 GB.
However, when the internal graphics controller is enabled, the amount of memory available to
applications is less than the total physical memory in the system. For example, the chipset’s
Dynamic Video Memory Technology dynamically allocates the proper amount of system mem-
ory required by the operating system and the application.
2.3
Intel® QM67 Express Chipset
The CP6003-SA is equipped with the mobile Intel® QM67 Express Chipset, a highly integrated
platform controller hub (PCH) with the following features:
•
Two x4 or eight x1 PCI Express 2.0 ports operating at 5 GT/s (only one x4 PCI Express
port is used on the CP6003-SA)
•
SATA host controller with six ports and RAID 0/1/5/10 support
•
Two SATA 6 Gb/s ports accessible via onboard connectors
•
Four SATA 3 Gb/s ports accessible via rear I/O
•
USB 2.0 host interface with up to 14 USB ports available (only six ports are used on the
CP6003-SA)
•
Integrated Ethernet controller
Table 2-1:
Features of the Processors Supported on the CP6003-SA
FEATURE
2
nd
Generation
Core™ i7-2715QE (SV)
2.1 GHz
2
nd
Generation
Core™ i7-2655LE (LV)
2.2 GHz
2
nd
Generation
Core™ i5-2515E (SV)
2.5 GHz
Processor Cores
four
two
two
Processor Base Frequency 2.1 GHz
2.2 GHz
2.5 GHz
Maximum Turbo Frequency 3 GHz
2.9 GHz
3.1 GHz
L1 cache per core
64 kB
64 kB
64 kB
L2 cache per core
256 kB
256 kB
256 kB
L3 cache
6 MB
4 MB
3 MB
DDR3 Memory
up to 16 GB / 1333 MHz
up to 16 GB / 1333 MHz
up to 16 GB / 1333 MHz
Graphics Base Frequency
650 MHz
650 MHz
650 MHz
Graphics Max. Dynamic
Frequency
1.2 GHz
1.0 GHz
1.1 GHz
Thermal Design Power
45 W
25 W
35 W
Note ...
Only qualified DDR3 ECC SODIMM modules from Kontron are authorized for
use with the CP6003-SA. Replacement of the SODIMM modules by the cus-
tomer without authorization from Kontron will void the warranty.
