CP3005-SA – Rev. 0.6 Preliminary
// 55
8/
MMEXT-XMC02 Extension Module
8.1.
Overview
The MMEXT-XMC02 is a factory-installed mezzanine extension module which along with an 8HP front panel provides
additional interfaces, such as:
One onboard XMC connector for connecting one x8, x4, or x1 PCI Express 2.0 XMC module over Highspeed
Extension
One onboard M.2 card socket (Socket 3, SATA-based, Key: M, Add-In-Card type: 2280)
One Reset switch
One SATA activity LED
XMC modules providing support for one x8 PCI Express 2.0 interface with up to 5.0 GT/s,
compliant with the ANSI/VITA 42.0 and ANSI/VITA 42.3 specifications, and with a power
consumption of up to 15 W can be used on the MMEXT-XMC02 module.
8.2.
Technical Specifications
Table 36: MMEXT-XMC02 Module Specifications
Features
Specifications
Onboard Interfaces
XMC
XMC interface for support of one x8, x4, or x1 PCI
Express 2.0 XMC module via a standard XMC
connector, J1
M.2
One M.2 (Socket 3, SATA-based, Key: M) for 2280
SSD Add-In-Cards
Board-to-Board
Two board-to-board connectors:
One 60-pin, high-speed PCI Express extension
connector, J5
One 120-pin, high-speed I/O extension
connector, J6
LEDs/Switches
HDD LED
One LED (green) monitors SATA HDD/SSD activity
Front Panel Switch
Reset button, guarded
General
Power Consumption
Power consumption without hard disk, CFast card
and peripheral devices connected:
50 mA at 3.3 V
50 mA at 5 V
Temperature Range
Operational:
0°C to +60°C, standard
Storage:
-40°C to +85°C, without battery
Climatic Humidity
93% RH at 40°C, non-condensing (acc. to IEC
60068-2-78)
Dimensions
MMEXT05-CMC02: 100 mm x 160 mm CP3005-SA
with MMEXT05-CMC02: 3U, 8HP CompactPCI-
compliant form factor
Board Weight
8HP CP3005-SA with MMEXT05-CMC02: 434
grams (with heat sink, front panel, and two 2 GB
SODIMM memory modules, but without CFast
card)
