Introduction
CP-RIO6-M
Page 1 - 6
ID 1031-2494, Rev. 2.0
P R E L I M I N A R Y
1.3
Technical Specification
Table 1-1: CP-RIO6-M Main Specifications
CP-RIO6-M
SPECIFICATIONS
Onboard Interfaces
SATA
Two SATA I interfaces implemented as onboard, 22-pin, SATA connec-
tors, J6 and J7, for connecting two 2.5" SATA HDDs/SSDs
CompactPCI
Three CompactPCI connectors, rJ3, rJ4 and rJ5, for connecting the
CP-RIO6-M to the backplane
General
Temperature Range
Operational:
0°C to +60°C
Standard
-40°C to +85°C
E2 (without any SATA HDDs /SSDs)
Storage: -55°C to +85°C
Without any SATA HDDs /SSDs
MTBF
2286782 h (MIL-HDBK-217 FN2, Ground Benign 30°)
6343931 h (Bellcore Issue 6, Ground Benign 30°)
Mechanical
6U, 4HP, CompactPCI-compliant form factor
Dimensions
233.35 mm x 80 mm
Board Weight
200 g (without 2.5" SATA HDD/SSD)
Note ...
When SATA HDDs/SSDs are installed, refer to
their operational specifications as this will influ-
ence the modules’ operational and storage tem-
perature.