![Kontron coolMONSTER/C3 User Manual Download Page 77](http://html1.mh-extra.com/html/kontron/coolmonster-c3/coolmonster-c3_user-manual_1996447077.webp)
KONTRON
CMP/P3 and CMP/C3 User’s Guide
71
Appendix B: BIOS Operation
26.8.1.
Boot First Submenu
Display the
Boot First
Menu by pressing
<Esc>
during POST. In response, the BIOS displays the
message Entering Boot Menu and then displays the Boot Menu at the end of POST.
Use the menu to select a following option:
!
Override the existing boot sequence (for this boot only) by selecting another boot
device. If the specified device does not load the OS, the BIOS reverts to the
previous boot sequence.
!
Enter Setup.
!
Press <
Esc
> to continue with the existing boot sequence.
26.9
Exit Menu
The following sections describe the five options in
Exit Menu
. Pressing
<Esc>
does not exit this
menu. You must select an item from the menu to exit.
Feature
Option
Description
Exit Saving Changes
Saves selections and exits setup.
The next time the system boots,
the BIOS configures the system
according to the Setup selection
stored in CMOS.
Exit saving changes.
Exit Discarding
Changes
Exits Setup without storing in
CMOS any new selections you
may have made. The selections
previously in effect remain in
effect.
Exit discarding changes.
Load Setup Defaults
Displays default values for all the
Setup menus.
Load setup defaults.
Discard Changes
If, during a Setup session, you
change your mind about changes
you have made and have not yet
saved the values to CMOS, you
can restore the values you saved
to CMOS.
Discard changes.
Save Changes
Saves all the selection without
exiting Setup. You can return to
the other menus to review and
change your selection.
Save changes.