AM4011
Functional Description
ID 1022-1626, Rev. 1.0
Page 2 - 9
P R E L I M I N A R Y
2.3.2
Module Handle
At the front panel, the AM4011 provides a module handle for module extraction, securing the
module in the carrier/chassis and actuating the hot swap switch.
The module handle supports a three-position operation.
Figure 2-2:
Module Handle Positions
Table 2-5:
Module Handle Positions
MODULE HANDLE POSITION
FUNCTION
Locked
When the AM4011 is installed, the module handle is pushed in the
“Locked” position and the following actions result:
•
The module is locked in the carrier / chassis
•
The hot swap switch is actuated
Hot Swap
When an extraction process of the AM4011 is initiated, the module handle
is pulled in the “Hot Swap” position and the following actions result:
•
The module is locked in the carrier / chassis
•
The hot swap switch is deactuated
Unlocked
When the module handle is pulled to the “Unlocked” position, the AM4011
can be fully extracted and the following actions result:
•
The module is unlocked in the carrier / chassis
•
The hot swap switch is deactuated
Note ...
For normal operation, the module handle must be in the “Locked” position.
Unlocked
Hot Swap
Locked
