Kontron AL i.MX6 ULL, User Manual

Page: 20 / 40

AL i.MX6 ULL - Rev. 1.0
www.kontron-electronics.de
// 20
Table 7: Power Consumption
Power Figures SBC BL iMX6 ULL
iMX6 ULL run 800 … 1400 mW
1x RGB IO Voltage ext.
Backlight max. 100 mA @up to 22 V = 2.2 W
or 3.3 V * 1000 mA = 3.3 W
or 5.0 V * 2000 mA = 10 W
LAN 1 150 mW
LAN 2 150 mW
2x USB 2.0 2x 5 V * 500 mA = 5 W
1x USB OTG 5 V * 500 mA = 2.5 W
DOUT 2x 800 mA * 24 V = 38.4 W
I.MX6 ULL power numbers are typical values based on typical silicon at 25 °C. Power numbers distributed to external devices are
max. allowed values, partially overcurrent protected.
Please refer to NXP i.MX6ULL Power Consumption Application Note for further details.
2.3.2. Functional Earthing System
There is a functional earth self-clinching nut on the side of the housing connected to the electronic ground inside the system and
to the mounting clamp on the backside.
2.3.3. Environmental Specification
Table 8: Environmental Specification
Temperature (Operating) 0 … 55 °C ambient
Relative Humidity (Operating) 93 % @40 °C, non-condensing