KSwitch D10 MMT Managed Time Sensitive Ethernet Switch - Preliminary User Guide, Rev. 0.99
// 83
9.6.6.
Telnet/SSH/Web - View Commands
9.6.6.1.
Show aaa
Description - Display the current authentication, authorization and accounting statuses and methods for all
interfaces.
show aaa
Parameter
Description
Parameter
N.A
N.A
Default
N.A
Mode
EXEC Mode
Usage
Display the current status of authentication, authorization and accounting.
Examples
Example
# show aaa
9.6.7.
Access Control List - Configuration Commands
Access Control List - configures from what remote IP address remote user will be able to access the Switch
management interface over Web, SNMP, Telnet/SSH.
9.6.7.1.
Access Management
Description - Enable/disable access management mode and configure up to 16 entries.
access management
no access management
access management
<access_id> <access_vid> <start_addr> [ to <end_addr> ] { [ web ] [ snmp ] [ telnet ] | all }
no access management
<access_id_list>
Parameter
Description
Parameter
<access_id>
ID of access management entry (1-16)
<access_vid>
VLAN ID for the access management entry (1-4095)
<start_addr>
Start IPv4 or IPv6 unicast address
<end_addr>
End IPv4 or IPv6 unicast address
Default
N.A
Mode
Global Configuration Mode
Usage
Enable access management mode and configure up to 16 entries. Use the no version of the
command to disable access management globally or a specific entry.