8
3
Installation and operation
3.1
Open-case inspection
NOTE:
Unless the oxygen machine is used immediately, the machine must
retain the carton and store the packaging material before use.
Firstly check the carton or other packaging is obvious damage. If any
damage is detected, contact the carrier or us. Take out all bulk packaging
from the carton. Carefully take out all components from the carton.
Check whether there is any damage to concentrator surface such as
notches, dents, scratches and so on. Check all components. Check whether
the components are missing according to packing list.
3.2
Storage and transportation
Do not place any objects on the top of the oxygen concentrator.
The unit should be stored in the environment without corrosive air and
with good ventilation.
Be careful to transport or convey, don’t let it reversal or thwart, tilt angle
not greater than 5°.
NOTE:
When the storage temperature is below 5°C, it can't work at once. Please
place the machine in a normal working temperature environment for
four hours before using.
3.3
Installation
1.
Open the package carton, take out the oxygen generator main unit and
all accessories, and check the accessories against the packing list.
2.
Put the oxygen concentrator in a convenient and safe place where there
is air flow.
3.
Take out the humidifier bottle, remove the top cover, and pour purified
water (or distilled water) into bottle, ensure that the water level is
between "MAX" and "MIN", and then cover the top cover.
4.
Place the humidifier bottle to the humidifier holder and fix it with the
elastic rope.