Kongsberg AIS 200 Installation Manual, rev. 2
Installation
3.
INSTALLATION
3.1
General information
To reduce the installation cost, crew members (Crew) qualified to perform electrical
installations can perform part of the installation. However, qualified service personnel (SP)
should carry out the final commissioning.
3.2
Unpacking and handling
Care should be taken when unpacking and handling the equipment. A visual inspection
should be made to ensure that the equipment has not been damaged during shipment, and that
all parts are present.
A standard AIS 200 delivery includes:
•
AIS 200 Mobile Unit
•
AIS 200 MKD
•
GPS4 GPS antenna including mounting kit and cable adapter set
•
Documentation, including User and Installation manual
3.3
Installation procedure
The table on the following pages describes a recommended installation procedure. It also
describes items that could be performed by the vessel crew and items that must be carried out
by qualified personnel. The table also includes page references to the various items'
installation description in this manual.
17
Summary of Contents for AIS 200
