KONIG+NEURATH TALO.S, Assembly Instructions Manual

Page: 29 / 38

26
(a) (b)
(b)
(c)
12.
Fitting the brief -
case extension
Remove the end cap (a).
Slide the briefcase extension
support (b) into the frame con -
sole and screw them together
from the side with cylinder
head screws M6x10 (SW5) on
each side (c).
Position top (d) to the consoles,
fit them together from under
-
neath, tighten screws ø4,5x20
(e) slightly.
Fine adjustment of the briefca -
se extension alignment to the
desk top can be carried out
using grub screws (f) M8x20
(SW4). Adjust the inclination
with grub screw M6x10 (g)
(SW3). After adjustment, fas
-
ten screws (e) tightly.
Fit an additionally reinforcing
tube (h) from underneath to the
top, using wood screws
ø4,5x45 (from type 1600).
(f)
(f)
(g)
(h)
(e)
(e)
(d)