KONIG+NEURATH INSIDE.50, Assembly Instructions Manual

Page: 29 / 31

Care and cleaning information
Plastic-coated and metal surfaces:
Clean the surface with a duster. Use warm water and / or a mild cleaner to remove
marks, then wipe dry.
Caution: Do not use abrasive cleaners! This can cause permanent visible damage.
Real wood surfaces:
Clean the surface with a duster. To remove dirt marks on the surface, use a damp
cloth and a neutral cleaner; then wipe dry.
Note: do not use any abrasive cleaning materials! These can lead to lasting, visible
damage.
Avoid exposure of veneer finishes to high temperatures and to humidity.
Note that UV radiation can over time change the colour of a veneer surface. This is
part of the natural ageing process of the wood.
Glazed elements :
Can be cleaned with over-the-counter glass cleaners.
No liability is accepted for damage to the finish caused by incorrect cleaning.
26