12
2. Installation
Press
OK
or
to pop up the “Input Password”
dialog, you cannot enter the menu unless the
correct password is entered. The default password
is “0000”.
Press
PR+
,
PR-
to move the cursor up or down.
Press
EXIT
or
to move the cursor to the left
menu.
2.1 Antenna Connection
Press
to select between Motor Antenna and
Fixed Antenna.
2.2 Satellite List
Press
PR+
,
PR-
to select the satellite up or down.
Press
OK
to select and mark, and press
OK
again
to cancel the selection and the mark.
If there is no satellite, the
red
coloured and
blue
coloured keys will be invalid.
1. Press the
red
coloured key to pop up the Edit
Satellite window. Press
PR+
,
PR-
to move cursor
up or down.
Name: User numeric keys to change the name of
the satellite; please refer to Edit Channel Name.
Longitude: Press
to toggle between east
longitude and west longitude. After pressing
OK
,
use numeric keys to edit the longitude, press
EXIT
or
PR+
,
PR-
to exit editing mode. The
range of the longitude is from 1 to 180 degrees.
If beyond this range, the system will inform
you “out of range” when you press the
yellow
coloured key on the remote control. After setting,
press the
yellow
coloured key to save and exit,
while pressing the
blue
coloured key to exit
without saving.