12243 Music stand light
»Double LED FlexLight«
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
12243-000-55 9/17
2 x 1
Light
diode
Light
head (2x)
Goose-
neck (2x)
Base
Clamp
0-25 mm
On/Off
Slide
switch
Battery
case
(3 x AAA)
max. 25 mm
R min. 20 mm
1. Equipment & Dimensions
2. Batteries/rechargeable batteries insert or change
3.a to the PLATES
3.b to K&M-NOTE HEADS
3.c on TABLES
3.c
and TRAYS
3. Placement of the lamp
4. Turn Light On/Off
Both light heads can be turned on or off independently of each other
5. Adjust the Light Head
2.a
Battery case lid:
Slide the lid with your thumb
(approx. 6 mm) in the direction
of the arrow.
3.a.1
Press the clamp and slide the
music desk or other plate
(max. 25 mm)...
4.a
Using the slide switch the
light is turned On and OFF
The highly flexible goosenecks can be used to quickly
place the light in the desired position - and it will stay there
until it is adjusted again.
4.b
Slide the slide switch backwards
= Light OFF
4.c
Slide the slide switch forward
= Light ON
3.a.2
...until the plate reaches
the inside of the lower end
of the clamp
3.b.1
Press the clamp and slide
the Lyra placed in the middle
of the note head...
3.b.2
...until the plate rea-
ches the inside of the
upper end of the clamp
3.c.2
To attain optimal balance
adjust the goosenecks and the
light head a bit
3.c.1
Place the lamp foot
/base on a level
surface. Four
points of support
ensure stability
2.b
Unlock the lid and lift
2.c
Insert three batteries (AAA-1.5V) i.e.
rechargeable batteries (AAA-1.2V);
(please pay attention to the polls +/-)
2.e
Slide the lid with your thumb
over the opening until both
hooks click into place
2.f
After the “click” ensure
that the lid is securely in place
2.d
Place the lid on the compartment
