Konica Minolta SONIMAGE HS2, Operation Manual

Page: 216 / 308

5 .6 Common Functions
216
5 .6 .8 Voice Control
This function controls the device through the voice input of registered commands . If a USB microphone is not con-
nected, voice reception is disabled, regardless of the settings .
Refer to "[Voice Control Settings] screen" of the "Operation Manual: Applications", regarding registering voice com-
mands .
You must have the optional "Voice Control License" to use this . Contact your service representative .
1
Press the [Menu] button > (voice reception button) on the [Other] tab .
• When the button appears blue, voice reception is enabled .
2
Face the USB microphone that is connected and input a voice command .
CAUTION •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
• We recommend adding a wake word to voice commands to prevent misrecognition of voice commands . For details,
refer to “[Voice Control Settings] screen" in the "Operation Manual: Applications" .
• If you have registered a voice command, be sure to do a voice recognition test to confirm that it is recognized.
• Place the USB microphone in a safe place where voice can be easily recognized depending on the operating envi-
ronment .
• The accuracy of recognition may vary greatly depending on the usage environment . Do the tests in the environment
in which you actually use the device .
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
IMPORTANT •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
• In the interests of safety, be sure to confirm the operation of the voice command by the connected USB microphone
before use .
• Start up the system after connecting the USB microphone . If you connect the USB microphone after starting up the
system, voice commands may not be received .
• Connect the USB microphone to the USB2 .0 port on the rear panel .
• If voice commands are not recognized about 1 minute while voice reception is enabled, disconnect the USB micro-
phone and connect it again .
• If the registered voice command is not recognized, just operate the mini console keys or the touch panel .
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••