15
(GB)
Note
Turn on the power of the computer after turning on the power of all the
other devices.
Turning on the power of the Film Scanner
Press the POWER switch.
The POWER, BUSY and ALARM indicators light, and after several
seconds the BUSY and ALARM indicators go out.
The POWER indicator remains lit in green and the power of the scanner
turns on.
To proceed with the operation, consult the instruction manual (Software
Manual).
Note
If any trouble occurs when the power is turned on, the ALARM indicator
remains lit in orange. In this case, check if the halogen lamp, carrier,
carrier cover and lamp cover are mounted correctly. ( pages 10
(GB)
and
12
(GB)
)
Turning off the power of the Film Scanner
Press the POWER switch.
The POWER indicator goes out and the power of the scanner turns off.
Turning the Power ON/OFF
POWER switch and indicator
BUSY indicator
ALARM indicator
