96
Setting the Operation Sounds
- You can turn on and off the beeps (sounds made for each type of operation
and warnings), the shutter sound, or the sound effects.
- The default setting is turned “ON” (set to sound).
Using the Set-up Menu
(Cont’d)
1. Select “SOUND”, press
왘
and the settings
screen appears. “BEEP” is selected, so
press
왘
.
2. Using
왔
or
왖
, select “OFF” or “ON” and
press either
왘
or the MENU/SET button. You
will return to screen 1.
• If you press
왗
, the setting is invalidated and you
return to screen 1.
3. Returning to screen 1, select “EFFECT”.
Then the shown left (screen 3) appears. After
pressing
왘
, use
왔
or
왖
to select “OFF” or
“ON”. Then press either
왘
or the MENU/SET
button and you will return to screen 1.
• If you press
왗
, the setting is invalidated and you
return to screen 1.
4. Select “SHUTTER” on screen 1 and then
press
왘
. Use
왔
or
왖
to select “ON” or “OFF”,
and then press
왘
or the MENU/SET button.
The settings are complete and you return
to screen 1.
• If you press
왗
, the setting will be invalidated
and you will return to screen 1.
1
2
3
4
Summary of Contents for Revio KD-410Z
Page 125: ......
