![Konica Minolta PCL-400 User Manual Download Page 78](http://html1.mh-extra.com/html/konica-minolta/pcl-400/pcl-400_user-manual_1993994078.webp)
3-19
2
Reminder
Before specifying settings, check that the following preparations have been com-
pleted.
The computer can communicate using the TCP/IP protocol.
This machine can communicate using the TCP/IP protocol.
The printer driver is installed on the computer.
(For details on installing the PCL driver, refer to “Installing the printer driver
by using the AutoRun Installation” on page 2-15. If the GDI driver is to be in-
stalled, refer to the User’s Guide for the GDI printer controller, included with
this machine.)
Checking IPP-related settings from Easy Web Management
For details on Easy Web Management, refer to “Using Easy Web Management” on
page 11-1.
1
Start up Easy Web Management.
2
Type in the password to log on to the Administrator mode.
– For the password, consult with the network administrator.
3
Click the Network tab, and then click “IPP Configuration” in the menu.
4
Make sure that the “Enable IPP” check box is selected. If the check box is not
selected, IPP printing cannot be performed.
Summary of Contents for PCL-400
