Konica Minolta PCL-400 User Manual Download Page 340

Page: 340 / 357

11-69

Network tab — IPP Configuration

To change the settings, specify the various settings, and then click the [Apply] button.

Item

Description

Enable IPP

Select whether or not IPP printing is enabled.

Printer Name

Type in the printer name. (maximum 127 characters)

Printer Location

Type in the printer location. (maximum 127 characters)

Printer Information

Type in the printer information. (maximum 127 characters)

Printer Driver In-
staller

Type in the URL for the printer driver. (maximum 127 characters)

Printer Maker and
Model

Type in the name of the printer’s manufacturer and model. (maximum 127 charac-
ters)

More Printer Infor-
mation — Manufac-
turer

Type in printer information for the manufacturer. (maximum 127 characters)

Summary of Contents for PCL-400






































































































































































































































































































































































Search results

Summary of Contents for PCL-400

Reviews:

Brands by name

Popular brands

Konica Minolta PCL-400, User Manual

Search results

Summary of Contents for PCL-400

Reviews:

Brands by name

Popular brands