Konica Minolta PCL-400 User Manual Download Page 334

Page: 334 / 357

11-63

Reminder

“Fax Configuration” appears in the menu only if fax kit FAX-4000 is installed.

Scan tab — Downloading/Uploading Destination List

The specified one-touch dial and speed dial settings can be saved and restored.

Download

The specified one-touch dial and speed dial settings can be saved.

This can be used to back up the settings.

Click the [Apply] button beside “Download”.

When the confirmation message appears, click the [Save] button.

Specify the destination and the name of the file where the settings are to be
saved.

Summary of Contents for PCL-400






































































































































































































































































































































































Search results

Summary of Contents for PCL-400

Reviews:

Brands by name

Popular brands

Konica Minolta PCL-400, User Manual

Search results

Summary of Contents for PCL-400

Reviews:

Brands by name

Popular brands