manualshive.com logo in svg

Konica Minolta PCL-400, User Manual

Share
Download
Konica Minolta PCL-400 User Manual Download Page 32

2-3

Connecting to the network

In the following procedure, the machine is connected directly to the computer by us-
ing a network cable.

When the machine is connected to a network, use the AutoRun Installation to install 
the printer driver. For the procedure on installing the printer driver when this machine 
is connected to a network, refer to “Installing the printer driver by using the AutoRun 
Installation” on page 2-15.

Procedures for making connections and installing the driver

The printer driver can be installed by using Plug and Play or by using the AutoRun 
Installation.

The installation procedure differs depending on the method used to make the connec-
tion. Use the installation method that corresponds with the connection method.

2

Reminder 

If the machine is to be connected to a USB port, install the driver by using Plug 
and Play. If the machine is to be connected to a network, install the driver by us-
ing the AutoRun Installation.

Summary of Contents for PCL-400






































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands