Konica Minolta magicolor 7450, Service Manual

Page: 180 / 346

Field Service Ver. 1.0 May 2006 9. Menu
143
magicolor 7450
Adjustment / Setting
C. LEFT ADJ DUPLEX
D. TRANSFER POWER
(1) SIMPLEX PASS
Function • Adjusts the left margin of media for double-sided printing.
Use
• To correct a misaligned print image.
LEFT ADJ TRAY 1: Adjust the left margin of duplex print paper fed from Tray 1
(Manual tray.)
LEFT ADJ TRAY 2: Adjust the left margin of duplex print paper fed from Tray 2.
LEFT ADJ TRAY 3: Adjust the left margin of duplex print paper fed from Tray 3.
LEFT ADJ TRAY 4: Adjust the left margin of duplex print paper fed from Tray 4.
LEFT ADJ TRAY 5: Adjust the left margin of duplex print paper fed from Tray 5.
Setting
/procedure 1. Select [LEFT ADJ DUPLEX] and press the MENU/SELECT key.
2. Select desired tray and press the MENU/SELECT key.
3. Select desired adjustment amount with the Up key
U
/Down key
V
and press the
MENU/SELECT key.
• The default setting is “0.”
-15 to +15 (1 step: 0.1 mm)
Functions • Adjust the 2nd image transfer output (ATVC) on the single-sided pages for each
paper type.
Use • To use when the transfer failure at the trailing edge occurs.
Adjustment
Range • The default setting is 0.
“0” (-5 to +5)
Adjustment
Instructions To increase the ATVC value (in the direction of a foggier image),
decrease the setting value.
To decrease the ATVC value (in the direction of a less foggy image),
increase the setting value.
Setting/
Procedure 1. Select [TRANSFER POWER] and press the MENU/SELECT key.
2. Select [SIMPLEX PASS] and press the MENU/SELECT key.
3. Select desired paper type with the Up key
U
/Down key
V
and press the MENU/
SELECT key.
4. Select desired setting value with the Up key
U
/Down key
V
and press the MENU/
SELECT key.