Output Tray
62
1
Load plain paper into the tray.
2
From the printer driver, specify the layout for duplex printing.
3
Click
OK
.
!"
With autoduplexing, the back side is printed first, and then the front
side is printed.
Output Tray
All printed media is output to the face-down output tray on top of the printer.
This tray has a capacity of approximately 250 sheets (A4/Letter) of 80 g/m
2
(22 lb) paper.
!"
If the media is stacked too high in the output tray, your printer may
experience media misfeeds, excessive media curl, or static buildup.
!"
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
If “Booklet Left Binding” is selected, the pages can be
folded as a left-bound booklet.
If “Booklet Right Binding” is selected, the pages can be
folded as a right-bound booklet.
1
1
2
3
3
3
1
1
2
Summary of Contents for Magicolor 5440 dl
