Konica Minolta Magicolor 2350 EN, Reference Manual

Page: 68 / 302

Customizing the Printer
Description
64—Chapter 2.6
9
Remove the Software Utilities CD-ROM from your CD-ROM drive and
store it in a safe place.
10
Customize the printer description (PPD) as described in the next section.
Customizing the Printer Description
1
Open the Chooser (under the Apple icon in the desktop menu bar).
2
Select the LaserWriter printer driver.
The chooser searches for available printers.
3
From the Select a PostScript Printer list, select your printer and then
select
Create .
If your network has more than one zone, select the zone that your
printer is configured for. (If it hasn’t been configured yet, it’s the
zone to which your printer is physically connected. Refer to
“Connecting to Macintosh Operating Systems” on page 11 for
more instructions.) Then select your printer from the Select a
PostScript Printer list, and finally select
Create
.
Message boxes indicating the set up progress appear and close. When
you are returned to the Chooser window, the Create button is replaced by
the Setup button.
4
Select Setup .
5
In the setup window,
select
Select PPD .