Konica Minolta IC-301, User Manual, Page: 41 / 212

Web Center 33
To connect to the Web Center from a client workstation:
1.
On your desktop, click the
Internet Explorer
icon.
2.
When the Internet Explorer starts, in the address field type:
http://<IC-301 name>—for example, if the IC-301 station
name is FALCON_E, type http://FALCON_E.
Important: To connect to the Web Center from a client workstation, you
must first enable the web connect service on the IC-301 print controller, see
Remote Tools Setup
on page 136.
Note: To connect to the Web Center, use Internet Explorer 5.0 or later.
Note: You can also use the IC-301 print controller IP address—for
example,
http://192.168.92.10.
Important: If you would like to connect to the IC-301 print controller
from a Macintosh client workstation, contact your system administrator
to add the IC-301 name to the DNS. This is required since Windows
name resolution protocols are not supported in Macintosh. The DNS
addition is required when clients go through a main server on the
network.