Konica Minolta IC-301, User Manual, Page: 168 / 212

160 Appendix A– Setting Parameters
each stack of pages is sorted in consecutive order. When
stacks are piled one on top of another, the entire job is
already sorted up or down.
•
Saddle stitch:
Use this option for a book-finishing technique
where the pages of a book are attached through stitching or
stapling in the spine fold —for example, brochures.
•
Perfect bound:
Use this option for a book-finishing technique
where the pages of a book are attached through trimming
of the spine fold, roughening the edges of the gathered
pages and gluing them together—for example, hardcover
books.
Size
Sheet size
¾
Select the required sheet size. If you select
Custom
, type the
required width in the
W
box, and the required height in the
H
box.
Wide paper
This check box supports the wide paper option in the bizhub PRO
C500 printer.
Trim size
¾
In the
Trim size
list, select the desired trim size. If you select
Custom
, type the required width in the
W
box , and the required
height in the
H
box.
Trim orientation
¾
Select the desired orientation,
Portrait
or
Landscape
for the trim
size.
Trim size is the size of the finished, trimmed document.