Konica Minolta IC-301, User Manual, Page: 100 / 212

92 Chapter 6– Production Printing
Printing with Page Exceptions
Page exceptions enable you to select a different media type for
specific pages within your job. The example in this section uses the
brochure from the imposition workflow ( see
Printing a Brochure
on
page 89) to print a cover with a different paper weight.
1.
Make sure that the tray contains tabloid paper that is heavier
than the paper needed for the rest of the job.
2.
In the workspace, verify which tray contains the heavy paper.
3.
In the
Storage
area, double-click the processed brochure job.
The job parameters window appears.
4.
Click
Exceptions
, and perform the following steps:
a.
In the
Type
list, select
Cover
.
b.
Select the
Duplex
check box.
c.
In the
Tray
list, select the tray with the tabloid paper that has
the heavy paper—for example,
Tray 1
.
d.
Click
Apply
, and then click
Submit
.
Note: This job contains the imposed settings that you set in the previous
example.
Note: The options in the Type list are different when the imposition
method is
saddle stitch
.