Konica Minolta IC-203, User Manual

Page: 161 / 432

PCL Printer Driver Setting (Windows) 8
IC-203 8-23
Binding - Hole-Punch
The output paper can be set to be punched with 2 holes, 3 holes or 4 holes.
Punch holes which can be specified vary depending on the destinations.
- USA: Either 2 or 3 holes can be specified.
- Others: Either 2 or 4 holes can be specified.
The position will be changed according with the [Binding Position] setting.
The [Hole-Punch] cannot be set in the following cases:
- When [Punch Unit] or [Punch Z-Fold Unit] is not available in [Options] tab.
- When an item other than [Z-fold] is selected in [Special Function] tab -
[Fold].
- When [Booklet] is selected in [Setup] tab - [Print Type].
2 Holes / Left Binding
(Portrait)
2 Holes / Left Binding
(Landscape)
2 Holes / Right Binding
(Landscape)
2 Holes / Right Binding
(Portrait)
ABCD ABCD
2 Holes / Top Binding
(Portrait)
2 Holes / Top Binding
(Landscape)
ABCD
ABCDEF ABCDEF
ABCDEF