Chapter 4 How to Use the Operator Panel
82
Item Configurable in Function Selection
*1: Although there is no factory default setting, it is set to [No.01] when you turn on the power. Therefore, the setting does not change even when you
initialize the operator panel.
Item
Description
Setting
Factory Default
Function
Selection
Configure the application(s) to be launched by the [Send to/
Pause] button.
It displays the scanner button events configured in the computer
([Send to 1] to [Send to 50]).
For information on how to configure scanner button events, refer
to
"Using a Button on the Scanner to Start Scanning" (page 110)
.
Note that this item is not available when using Kofax VRS.
No.01 to No.50 / No.C
(No.C indicates the Software Operation
Panel)
(*1)
