Chapter 4 How to Use the Operator Panel
70
■
Checking the number of sheets scanned
1
Press the power button on the front of the scanner.
D
[Ready] is displayed on the LCD.
2
Press the [Menu] button.
D
[Main Menu] is displayed on the LCD.
3
Press the [
U
] or [
V
] button and select [25: Doc Counting
Mode], then press the [Function/Enter] button to confirm.
D
[Doc Counting Mode (More documents)] is displayed on the LCD.
4
Load the documents on the hopper and press the [Scan]
button.
100 sheets will be loaded as an example here.
D
Scanning starts and [Count] will display "100".
5
Press the [Function/Enter] button to confirm.
D
[Doc Count Check Mode] is displayed on the LCD.
Function
/Enter
Check
Menu
Scan
Stop
Eject
Counter
Reset
iMFF
Send to
/Pause
Clear
/Back
c
Power Button
d
[Menu] Button
e
[
U
] / [
V
] Button
[Function/Enter] Button
f
[Scan] Button
h
Scan
g
[Function/Enter] Button
See Step
Documents may not be counted correctly if a multifeed
occurs during scanning.
You can switch whether to enable multifeed detection by
pressing the [Eject] button. For more details, refer to
" About the Indicators" (page 64)
.
