Chapter 9 Operational Settings
203
Scan Settings for Documents with Tabs/Non-
rectangular Documents
[Scan Setting for Document with Tab (Automatic
Page Size Detection)]
For documents with index stickers or index tabs attached on
the end, you can scan the whole document including its
attachments with Automatic Page Size Detection.
1
Start up the Software Operation Panel.
"9.1 Starting Up the Software Operation Panel" (page 170)
.
2
From the listing on the left, select [Device Setting 2]
J
[Scan Setting for Document with Tab (Automatic Page
Size Detection)].
3
Select one from [Document with tab], [Document without
tab] or [Non-rectangular document].
Item
Description
Document with tab
Scans up to 20 mm off the bottom edge of
the document with a tab.
Document without
tab
Stops the scan when it detects the bottom
edge of the document.
Non-rectangular
document
Scans up to 120 mm off the bottom edge of
the detected document.
(Not available when connected via SCSI or
USB Connector 2)
z
The scanning speed slows down when you select
[Document with tab] or [Non-rectangular document].
z
To scan documents with tabs or non-rectangular
documents, refer to
"Loading Documents with Tabs or
Non-rectangular Documents" (page 43)
z
For information on how to configure Automatic Page
Size Detection, refer to
Skewed Document Images" (page 97)
z
When connected via SCSI or USB Connector 2, the
tab may be missing from the scanned image when a
document smaller than A5 size is scanned.
