Konica Minolta Drypro 832, Manual

Page: 38 / 84

38
3�3 Loading Films
When the supply tray runs out of films, an audible error/empty sound is produced and the [Open/Enter]
lamp lights up. Additionally, the indicator of the remaining quantity of films ( ) flashes and the mes-
sage “Film Empty” is shown in the message display window on the operation panel.
In such a case, load films in the supply tray, following the steps below:
1
Press the [Open/Enter] button�
The following messages appear in the message display window.
• If the target tray is optional Lispl-832, “TRAY 2” is displayed.
The supply tray pops out by several centimeters.
In the following cases, the supply tray will not open�
When there are films during the printing process.
The message “Please wait a while.” appears, and then the supply tray will
open when printing is completed.
The following message appears in the message display window.
• For the film size and type, values set for the target tray are displayed.