background image

77

Single, multiple, or all files can be locked. A locked file cannot be deleted by either the
playback menu functions or the QV/delete button. However, the formatting function (p.
76) will erase all files on a memory card whether locked or not. Important images should
be locked. The lock function is in section 1 of the playback menu (p. 72). The lock option
has four settings:

LOCK

The file displayed or highlighted in the playback mode is locked.

This

frame

All

frames

Marked

frames

To lock or unlock multiple files. When this setting is chosen, the frame-
selection screen (p. 74) is displayed. Use the left/right keys of the controller
to highlight the file to be locked. Pressing the up key marks the file with the
lock indicator. To unlock a file, highlight it with the yellow border and press
the down key; the lock indicator disappears. Continue until all the files to be
locked are marked. Press the central button of the controller to lock the
marked thumbnails, or press the menu button to cancel the operation and
return to the playback menu.

All files on the memory card are locked.

Unlock

all

All files on the memory card are unlocked.

Summary of Contents for DiMAGE DiMAGE Z6





































































































































Reviews: