Konica Minolta DI2510 Advanced Information Download Page 293

Page: 293 / 334

Touch Panel Messages

Di2510/Di3010/Di3510

12-27

12.5

When the Message “Cannot Staple.” Appears

To clear jammed staples

When a finisher is installed and the staples are jammed, the message
shown below appears.

Follow the procedure described below to clear the jammed staples.

Follow the procedure described below to remove the paper and staples.

Note

When the message “Cannot Staple.” appears, clear the jammed
staples as described below.

Not following the following procedure and forcefully pulling out the
paper may result in damage to the “Stapler Unit”.

Remove all paper from the finisher.

Summary of Contents for DI2510















































































































































































































































































































































Search results

Summary of Contents for DI2510

Reviews:

Brands by name

Popular brands

Konica Minolta DI2510, Advanced Information

Search results

Summary of Contents for DI2510

Reviews:

Brands by name

Popular brands