Konica Minolta Di1610, Service Manual

Page: 93 / 187

S-11
4-2. Service Mode Setting Procedure
NOTE
• Be sure to keep the access procedure for the Service mode from any unauthorized per-
sons not involved with service operations.
<Procedure>
1. Press the Utility key.
2. Press the following keys in order to enter the Service mode.
Stop
→
0
→
0
→
Stop
→
0
→
1
3. The first Service mode screen appears.
<Exiting Procedure>
• Press the Panel Reset key.
<Changing the Settings for Service Mode Functions>
1. Press the Zoom Select key to select the desired function.
2. Press the Zoom Select key, Density Select key or the 10-Key Pad to select the desired
setting.
3. Press the Yes key to apply the setting.
4. To return to the previous screen, press the No/C key.
NOTE
• In order for the settings for the Service mode functions to be changed, the machine must
be turned off, then on again.