Konica Minolta CS-7, Operation Manual

Page: 55 / 424

55
Chapter 3
3.5 Exposure screen
3 .5 .6 Control panel (Exp .Info: Exposure conditions)
This is the control panel to perform setting of the X-ray device irradiation information (exposure conditions).
(8)
(10)
(3)
(5)
(4)
(6)
(7)
(9)
(1)
(2)
Number Name Functions
(1) X-ray tube device temperature Displays the temperature of X-ray tube .
(2) Mode
Can switch between 2 point mode and 3 point mode .
According to the switching, the display of "mA", "mS", and "mAs" chang-
es .
(3) kV, mA, mS, mAs setting button Set the value of "kV", "mA", "mS", and "mAs" with [+] and [-] buttons.
(4) PATIENT SIZE Set the body type of patient .
(5) FOCUS Adjusts the size of focus area .
(6) AEC button Switches the mode of automatic exposure.
(7) DENSITY button
Adjust the dosage of radiation by pressing [+] and [-] buttons or moving
the slider .
(8) Filter selection button
Select from the menu .
The selection range varies according to the type .
(9) SID display Displays focal point - detector distance (cm) .
(10) Collimator Height/Width adjustment results Displays the results of adjusting the height and width of collimator .
HINT •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
• Items and content displayed by control panels vary according to the device type and the maker of connected X-ray devices .
•
The connected X-ray device exposure conditions will be displayed for every exposure conditions set key. The displayed ex -
posure conditions can be altered before exposure.
• X-ray exposure conditions can also be set from the operation panel of a connected X-ray device.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••