Konica Minolta CS-7, Operation Manual

Page: 350 / 424

350
7 .22 Other functions
7 .22 .8 Addition of sub monitor
An optional sub monitor can be connected to this de-
vice .
The following are precautionary items when a sub
monitor is used .
• Used as auxiliary exposure equipment in the expo -
sure room .
• A network display adapter is needed for connection .
IMPORTANT •••••••••••••••••••••••••••••••••••••
• When a problem, such as network disconnection,
occurs, there may not be anything displayed on the
monitor . If this occurs, restart this device .
• If the power for the AeroDR Interface Unit, etc . is turned
on/off while a sub monitor is connected, the network
can be disconnected and the screen display goes black
or freezes, being no-op. When turning on/off the power
for the AeroDR Interface Unit, etc ., do so after unplug-
ging the power cable for the network display adapter or
restart this device after turning the power on/off.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
7 .22 .9 Addition of monitor for
checking image
An optional monitor for checking image can be con-
nected to this device .
The following are precautionary items when a monitor
for checking image is used .
• Used as a monitor for checking images when oper-
ating this device with the portable X-ray device .
IMPORTANT •••••••••••••••••••••••••••••••••••••
• This device's monitor will not be displayed when con-
nected .
• When connecting a monitor for checking images, do
not perform exposure.
• Do not perform a diagnosis using the image displayed
in the monitor for checking images .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
7 .22 .10 Display of manuals
The "CS-7 Operation Manual" and other manuals can
be displayed .
z
Displaying a manual from the system moni-
tor screen
The procedure to display a manual from the system
monitor screen is as follows .
1
Press [System] on the initial screen .
• The system monitor screen is displayed .
2
Press [Manual] .
• The "CS-7 Operation Manual" is displayed .