Konica Minolta CS-7, Operation Manual

Page: 312 / 424

312
7 .14 Merging and separation of studies
HINT •••••••••••••••••••••••••••••••••••••
• You can also drag and drop an image to move it .
• To move images to the image list area on the left,
select images in the image list area on the right and
press [ ].
• To swap images between the left and right image list
areas, select images in each image list area and press
[ ].
• The moved image is placed at the end of the image
list area of the destination .
• If the moved image is moved to the original study
again, it will be placed in the same location it was in
before it is moved .
• If an output image is moved, the study status is sus-
pended, and the output completed checkmark is
cleared . To output data again, press
button or
complete the study that is being performed .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
8
Press [Save] .
• Press [Close] to return to the list screen.
• The Image Move screen is closed .
7 .14 .4 Checking an image
The procedure for checking an image is as follows .
1
Double-click the image to check its de-
tails .
• The image display dialog box appears, and you
can check the details of the target image .
HINT •••••••••••••••••••••••••••••••••••••
• The image display dialog box shows the same image
as the one displayed on the exposure screen.
• If you drag four corners or four sides of the image
display dialog box, you can zoom in on or out of the
image display dialog box.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
2
Press [×] .
• The image display dialog box closes.