Konica Minolta CS-7, Operation Manual

Page: 310 / 424

310
7 .14 Merging and separation of studies
7 .14 .3 Moving images
The procedure for moving images between studies is
as follows .
HINT
•••••••••••••••••••••••••••••••••••••
• To combine studies, select the suspended and ex -
posed studies and combine (reassign) them with
unexposed images. However, you can move images
regardless of the status of the source or destination
study .
Example: Unexposed study and unexposed study,
suspended study and exposed study
• The Image Move button may not be displayed de-
pending on settings, resulting in an image movement
failure .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
1
On the list screen, select the study from
which to move images .
2
Press [Merge] .
• The Study Search screen is displayed .
3
Enter the patient name, ID, and other
items of the study to move images to .
HINT
•••••••••••••••••••••••••••••••••••••
• When an accession number is used for the search,
you can search for all studies related to the patient IDs
of the target study . When using this function, contact
Konica Minolta technical representatives .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
4
Press [Search] .
• A confirmation screen is displayed.
HINT •••••••••••••••••••••••••••••••••••••
• When there are multiple sets of study results, the se-
lection screen that is displayed when multiple relevant
studies have been found is displayed . If you select a
destination to move a study to and press [Execute],
the confirmation screen shown in Step 5 is displayed.