Konica Minolta CS-7, Operation Manual

Page: 295 / 424

295
7 .12 Multi-study
Chapter 7
Number Name Functions
(3) Exposure item list Exposure item list is dis
-
played .
(4)
Image copy but-
ton
Copies the exposed image
(examination).
(5)
Image replace
button
Replaces the exposed image
(examination) with another.
(6)
Exposed image
button
Saves the exposed image
and operating state .
(7) Output button Outputs the exposed images.
Body part selection screen
(2)
(3)
(1)
Number Name Functions
(1) Accession No .
Accession number of the
displayed examination is
displayed .
(2) Issue button
Issues the accession num-
ber .
(3) Delete button
Deletes exposures individu -
ally after selecting the expo -
sure to be deleted .
IMPORTANT •••••••••••••••••••••••••••••••••••••
• Aside from the screen structures explained here, each
screen is the same as usual. However, [
] cannot
be pressed on the exposure screen when performing
an examination with multi-study.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
7 .12 .2 Multi-study examination
from the list screen
The following describes the procedure for implement-
ing the multi-study based examination from the list
screen .
1
Press [Refresh] on the list screen.
• It acquires the information from the higher sys-
tem to update the list .
2
Select the examination item .
• The selected examination is highlighted.