Konica Minolta CS-7, Operation Manual

Page: 288 / 424

288
7 .11 Media output
Number Name Functions
(5) Tool bar area
[Run] and [Close] are dis -
played. [Close] is only
displayed when the display
transitioned from the system
monitor screen to the media
output screen. Press [Run] to
start writing. Press [Close] to
return to the system monitor
screen .
7 .11 .2 Output to media
Perform outputting to media using the following proce-
dure . First, show the media output screen from the list
screen or the system monitor screen .
1
Display the media output screen .
• Press the [Media] tab to display it from the list
screen .
• Press [Media] to display it from the system moni -
tor screen .
• The media output screen is displayed .
When outputting examination results to media, use the
media output function .
IMPORTANT •••••••••••••••••••••••••••••••••••••
• When outputting to CD-R and DVD-R media, this de-
vice must be equipped with a writable media drive .
• Since writing to CD-R and DVD-R media uses the
disc-at-once method, additional data cannot be added
on the media once data is written .
• The patient ID is used in the image file name when
outputting to JPEG. When the patient ID file name has
restricted characters (.\/:*?"<>|), they are replaced with
"_" . Be careful not to misidentify patients .
•••••••••••••••••••••••••••••••••••••••••••••••••••••
7 .11 .1 Screen structure
Structure of the media output screen is as follows .
(2)
(1)
(4)
(5)
(3)
Number Name Functions
(1) Sorting tab
Transition with the list
screen .
When you switch from the
system monitor screen to the
media output screen, tabs
other than the [Media] tab
are not displayed .
(2) Filter items
Keyword input column for
refined display for the patient
displayed in the [Media] tab.
(3) List display area
Examinations registered on
the [Media] tab are dis -
played .
(4)
Conditions setting
area
The setting when output-
ting to media is displayed . If
you press [Set], the setting
screen for media output is
displayed .