Konica Minolta CM-M6, Instruction Manual

Page: 79 / 128

76
3
En
vir
onment Set
tings/Other Set
tings
„
Display Type
Configure the display type for the measurement results.
Memo
All display types are selected under the initial settings.
Operating Procedure Start the procedure from the <Measurement cond.> - <Display cond.> screen.
1
Use [

] or [

] to move the cursor to “Display type”,
and then press the [Confirmation] key.
The <Display type> screen is displayed.
2
Use [

] or [

] to move the cursor to the desired
display type, and then press the [Confirmation] key.
Selections
„
Absolute value: Displays the absolute value of the
colorimetric and the gloss value.
„
Difference: Displays the color difference against the
target color. The measurement that failed the pass/fail
judgment based on the tolerance will be highlighted in
red.
„
Audi2000(ΔEc): Displays ΔEc (Audi2000), the average
value, and the maximum value.
„
Audi2000(ΔEp): Displays ΔEp (Audi2000), the average
value, and the maximum value.
„
MI: Displays the metamerism index. (If illuminant 2 has
not been set, a number will be displayed.)
„
Pass/Fail: Determines whether the color difference
related to the target are within the tolerance range set in
advance. If within the tolerance, the judgment will be
displayed as “Pass”. If even one difference is not within
the tolerance, the judgment will be displayed as “Fail”.
„
Abs. Graph: Displays a graph of the absolute value of the colorimetric value.
„
Diff. Graph: Displays a graph showing the color difference against the target color.
„
Line graph: Displays a graph of the color values according to angle differences.
Memo
A check mark means the item is selected.
3
After all settings have been configured, use [

] or [

] to move the cursor to “OK”, and then press
the [Confirmation] key.
The selection is confirmed and the screen returns to the previous screen.
Notes
If [ESC] is pressed without pressing the [Confirmation] key, the settings will not be changed and the screen
will return to the <Display cond.> screen.
Sample
Measurement cond.
Display cond.
Display type
Equation
CMC
Direction
Double-Path
Color space
L*C*h
Sample
Measurement cond.
Display cond.
Display type
Equation
CMC
Color space
L*C*h
Display type
OK Cancel
Absolute value
Difference
MI
Pass/Fail
Audi2000 (∆Ec)
Audi2000 (∆Ep)
Abs. Graph
Diff. Graph
Line graph