70
3
En
vir
onment Set
tings/Other Set
tings
Manual Average (1 to 10)
Specify the number of measurements for manual averaging. The average of the data obtained from the
measurements conducted by pressing the measurement button the specified number of times is determined as
sample data.
Memo
“1 Times” is set as the number of measurements for manual averaging under the initial settings.
Operating Procedure
Start the procedure from the <Measurement cond.> - <Measurement setup> screen.
1
Use [
] or [
] to move the cursor to “Manual
average”, and then press the [Confirmation] key.
2
and
will be displayed above and below the
count in the count selection. Use [
] or [
] to
specify a value.
Settings
{
01 to 10 Times:
Specify the number of measurements, from 1 to 10, to
perform when using manual averaging.
3
Press the [Confirmation] key.
The selection is confirmed and the screen returns to the
<Measurement setup> screen
.
Notes
If [ESC] is pressed without pressing the [Confirmation]
key, the settings will not be changed and the screen will
return to the <Measurement setup> screen.
With manual average measurement, measurement is
performed for the configured number of times the
measurement key/button is pressed, and the average value of
those measurements is saved as a single measurement.
Selecting “Undo” after a measurement allows users to perform
the previous measurement again.
After the set number of measurements has been performed,
the average can be saved by selecting “Save”.
To save the average automatically after the set number of
measurements has been performed, select “Auto save” under
<Measurement cond.> - <Measurement setup> - <Manual
average option> screen
.
Sample
Measurement cond.
Measurement setup
Measurement angle
Manual average option
Manual save
Manual average
1 Times
Auto average
3 Times
Sample
Measurement cond.
Measurement setup
Measurement angle
Manual average option
Manual save
Manual average
Auto average
Manual average
0
3
/ 1 0
Sample
Manual average
03/03
Cancel
Save
Undo
0.01
0.02
0.02
0.01
0.01
0.01
-15°
15°
25°
45°
75°
110°
Summary of Contents for CM-M6
