Konica Minolta CM-M6, Instruction Manual

Page: 109 / 128

106
4
Other F
unctions
2
Use [

] or [

] to move the cursor to “ON”, and then
press the [Confirmation] key.
The instrument’s USB host is turned ON, and the display
will return to
the <Communication setup> screen . The
Bluetooth icon will be displayed in the status bar.
To configure the Bluetooth PIN code, go to step 3.
3
Use [

] or [

] to move the cursor to “Meter PIN
code”, and then press the [Confirmation] key.
The <Meter PIN code> screen is displayed.
• The initial value of the PIN code is “0000”.
4

and

are displayed above and below the PIN.
Use [  ] or [  ] to specify a value. Use [  ] or [  ] to
move between digits.
• The personal identification number (PIN) should consist
of between four and eight numbers (0 to 9).
5
After inputting the value, press the [Confirmation]
key.
The display will return to the <Communication setup>
screen
.
Communication setup
Sample
Setting
0002 TARGET-2
USB host
OFF
Meter PIN code
00000000
Printer address
000000000000
Auto print
OFF
USB host
OFF
ON
Communication setup
Sample
Setting
0002 TARGET-2
USB host
OFF
Meter PIN code
0000
Printer address
000000000000
Auto print
OFF
Sample
0002 TARGET-2
01234567
Meter PIN code
0 1 2 3 4 5
6
OK Cancel
7 8 9
×